---
title: "Velocity report."
canonical: "https://support.appfire.com/space/DLP/298159553/Velocity%20report."
format: markdown
---
| **Contents:**
> Macro (toc) |
| --- |
---
> ℹ️ **This report type is available with ****[BigPicture Enterprise](https://appfire.atlassian.net/wiki/spaces/DLP/pages/297994971)**** only.**
## What does the report show?
Velocity value is presented on the Velocity chart in the form of a trend line.
The average value calculated for a selected sprint.
The velocity value calculated for the last sprint is additionally displayed at the end of the chart.
> ℹ️ **The report is based on story points**.
> ℹ️
> ℹ️ - Grey column - team capacity in a given period
> ℹ️ - Green column - story points of done tasks
> ℹ️
> ℹ️ Data breakdown is based on program structure (Box structure). The velocity report shows two columns for each sub-Box (such as Iteration).
> ℹ️
> ℹ️ **The report is generated per ****[team](https://appfire.atlassian.net/wiki/spaces/DLP/pages/298287632)****. **
### Grey column - [team capacity](https://appfire.atlassian.net/wiki/spaces/DLP/pages/298224554) calculation
**"Planned" value (grey column) = capacity of a team per sub-Box time period**
Planned value is taken from the [capacity planning tab](https://appfire.atlassian.net/wiki/spaces/DLP/pages/297865366) in the Resources module. This value is always initially calculated based on the availability of team resources in a given period but can be manually overridden in the capacity planning tab of the Board module.
How to check if the values were manually changed?
Go to the **Board module > capacity planning tab > Highlight changes.** Manually adjusted values will be indicated in orange.
If the value was not manually overridden → "**Planned" value (grey column) = ** **Team capacity per day (sum of ****[individual capacities of team members](https://wiki.softwareplant.com/display/DLP/.Team+member+availability+v8.2)**** per day) multiplied by the duration of a Box** (such as Iteration).
For example, when:
- daily capacity of "Team Alfa" = three story points
- "Iteration 1.2” = 11 workdays
- Planned capacity for Iteration 1.2 = 11x3 = 33 story points
### Green column - done tasks sum
Only tasks in "Done" status are included in the calculation.
**Example**:
Iteration 1.1 contains four done tasks assigned to "Team Alfa".
Story point sum = 5 + 3 + 2 + 6 = 16
## Scope of the report
> ℹ️ When you create a Velocity report :
> ℹ️
> ℹ️ - **information is broken down to the lowest available Box level**
> ℹ️ - a report is created in a particular Box - **only sub-Boxes nested under that Box are included**
> ℹ️ - **all Boxes in the report are from the same level**
> ℹ️
> ℹ️ See examples below.
#### **Case 1 - report created in the main program Box**
| **Report created in "SAFe ART (Smart house)"** | **Result** |
| --- | --- |
| **lowest available level ** | **Iteration** (2nd level under the main program Box) |
| **Included Boxes** | **all Iterations** (all are nested under the main program Box) |
| **all on the same level** | All Iterations are on the same level in the Box hierarchy (2nd level under the main program Box) |
Resulting report:
#### Case 2 - report created in a Program Increment
| **Report created in "Program Increment 1"** | **Result** |
| --- | --- |
| **lowest available level ** | **Iteration** (2nd level under the main program Box) |
| **Included Boxes** | **3 Iterations** (nested under the "Program Increment 1" - Iterations nested under other Program Increments are not included) |
| **all on the same level** | All Iterations are on the same level in the Box hierarchy (2nd level under the main program Box) |
Resulting report:
## Report configuration
Report configuration/ edit/ delete information can be found on the [following page](https://appfire.atlassian.net/wiki/spaces/DLP/pages/298159310). Report management works the same for all reports.
### Available fields
| **Element** | **Description** |
| --- | --- |
| **Name** | The report name is displayed in the header of each report. |
| **Show iterations with empty capacity** | When selected, Boxes with [team capacity = 0](https://appfire.atlassian.net/wiki/spaces/DLP/pages/298224554) are included in the report
When team capacity = 0?
- [team memberships](https://appfire.atlassian.net/wiki/spaces/DLP/pages/296981350) of all members have ended
- individuals in the team have no capacity (for example, if everyone has time-off, team capacity = 0) |
| **Show the velocity line on the chart** | checkbox, checked by default |
| **The number of iterations used to calculate velocity** | numeric field, integers only, from 1 to 9, default value = 3 |
| **Project **(conditional field) | This field is available in Portfolio Boxes ([more information below](/wiki/pages/resumedraft.action?draftId=296847662#Velocityreport-VelocityReportPortfolio)). If a Velocity report is added to a Portfolio Box containing multiple projects, you will need to specify which project the report should be generated for.
 |
| **Team** | The report is generated for the selected team. |
## Conditions
- tasks must be assigned to teams
- tasks must have a "story points" value
- **lower-level sub-Boxes must exist** (otherwise, the report will be empty)
- lower-level sub-Boxes must have their scope type set to "[sub-scope](/wiki/pages/resumedraft.action?draftId=296847662#Velocityreport-SubScopeVelocityReport)" (in most cases, those will be Program Increments and Iterations).
### Tasks without a team
Tasks that have not been assigned to a team are not accounted for in the calculation (are ignored).
### [scope type](https://appfire.atlassian.net/wiki/spaces/DLP/pages/296982489) = sub-scope
The report is based on lower-level Boxes. Their scope type must be set to "sub-scope".
- Own scope → tasks are added directly to the scope of the Box (such as a program Box)
- Sub-scope → Box doesn't have its own scope - it simply displays a section of the parent scope (for example. tasks are added to the main project Box and later divided into Program Increments and Iterations). If you add a task to such Box, it is automatically added to its parent.
In most cases, the scope type of Program Increments and Iterations is set to "sub-scope".
### Project in a portfolio Box
A Portfolio Box can contain multiple program Boxes, each with its scope.
Portfolio Box scope type must be set to "None".
A Velocity report cannot be generated for multiple separate program Boxes.
You can create a Velocity report in a Portfolio Box, but you will need to limit the report to one project.
## [Story Point conversion](https://appfire.atlassian.net/wiki/spaces/DLP/pages/296851170) set to "0"
When a team is still learning to estimate its velocity, the conversion ratio changes from sprint to sprint. You may prefer to show the velocity of future iterations as unknown (=0) and wait for the scrum master to later enter the correct value based on historic data ([capacity planning tab](https://appfire.atlassian.net/wiki/spaces/DLP/pages/297865366) of the Board module).
Example:
Story Point conversion = 0
The planned capacity of a team = 0 until manually changed
## Additional use cases - possible mistakes
### Case 3 - no lower-level Boxes
| **Report created in "Iteration 1.1"** | **Result** |
| --- | --- |
| **lowest available level ** | **none** |
| **Included Boxes** | **none** |
| **all on the same level** | **n/a** |
Iteration 1.1 has no child Boxes:
The Velocity report created in Iteration 1.1 is empty.
### Case 4 - Iteration under Iteration
| **Report created in "SAFe ART (Smart house)"** | **Result** |
| --- | --- |
| **lowest available level ** | **Iteration** (3rd level under the main program Box) |
| **Included Boxes** | **Iteration 1.3.1** (the only 3rd level Box nested under the main program Box) |
| **all on the same level** | Other iterations are on the 2nd level - they won't be included |
Depending on the setup, you could create a structure like this:
In this case, Iteration 1.3.1 is the lowest level under SAFe ART (Smart house). The report includes only Boxes on the same level, so all other Iterations are omitted:
